What actually works with PS5 over USB-C and HDMI

AudioQuest explicitly lists PS5 gaming features including 4K120, VRR, ALLM and QFT for Pearl 48.

The active cable is not bidirectional: connect PS5 source equipment to SOURCE and the TV to DISPLAY; update LG 8K or 4K@120Hz TV firmware.

Phoossno lists PS5 gameplay; this active optical cable is directional, so the source end must connect to the console.

LG explicitly lists PlayStation 5 for the exact 27GR93U-B monitor. Full high-refresh operation depends on the console HDMI output mode and the display HDMI 2.1 capabilities.

ASUS explicitly names PlayStation 5 for VRR on the ROG Strix XG49WCR. This confirmation applies to the monitor HDMI console path and does not establish handheld compatibility.

MSI identifies the exact MPG 321URXW QD-OLED as an ideal choice for PS5, describing its 4K panel, 240Hz refresh rate, and 0.03ms response time.

MSI's exact-model manual names PlayStation in Console Mode. Available resolution, refresh rate, VRR, and HDR still depend on the console settings and firmware.

The FO32U2P manual explicitly names PS5 in its HDMI-CEC behavior. It does not confirm Xbox Series because the same sentence names Xbox only generically.

Fully compatible at 1440p120 with no noticeable lag, though the console obviously can't use the monitor's 360Hz ceiling.

MSI explicitly lists PS5 in Console Mode and states support for 120 Hz at QHD 2K. This is not a claim of 4K120 behavior.

MSI documents 2K Resolution PS5 Optimization and FHD at 120Hz for this exact monitor. Its HDMI inputs are HDMI 2.0b and top out at WQHD 144Hz, not 4K output.

Doesn't support VRR in the console's settings and appears capped entirely at 60Hz due to handshake and signaling issues.

ASUS lists Full HD output at 120Hz on PS5 for this exact VG27WQ1B monitor; its higher WQHD mode is not claimed for PS5 on the product page.

BenQ lists the EX2710R among MOBIUZ models that can display 1440p at 120Hz after the PS5 firmware update that added 1440p output support.

Dell explicitly lists the exact AW2523HF with PlayStation 5. Confirmed console modes depend on the monitor input, resolution, refresh rate, HDR, and VRR limits documented in Dell’s compatibility table.

Dell lists the exact G2524H as compatible with PlayStation 5 in its gaming monitor table. Check the documented console mode and HDMI limits before expecting the panel maximum refresh rate.

Integrates well with the console, delivering responsive images at 4K resolution.

Unlike the original PG32UQX, this revision's full HDMI 2.1 ports let the PS5 run 4K120 with true 4:4:4 chroma — no forced subsampling.

Multiple owners bought this monitor specifically expecting PS5 VRR support and confirm it simply does not work — the console displays 1440p120 cleanly in Fidelity or Performance mode, but the VRR option stays grayed out because the HDMI ports lack true HDMI 2.1 FRL hardware.

Arzopa lists PS5 for this exact Z3FC portable monitor. Connect by HDMI and provide the monitor's required power separately; console video modes remain title and settings dependent.

Arzopa lists PS5 for this exact Z1RC portable monitor. Connect by HDMI and provide the monitor's required power separately; console video modes remain title and settings dependent.

PS5 is listed by Arzopa as compatible. Connect its HDMI output for video and power the portable monitor separately through USB-C.

Gigabyte's exact-model manual lists PS5 as an HDMI-CEC device. Supported game resolution, HDR, VRR, and refresh rate still depend on console settings and title support.

Gigabyte's MO32U manual lists PS5 as an HDMI-CEC device. Actual output resolution, HDR, VRR, and refresh rate remain determined by the console and game.

Gigabyte's shared exact-model manual lists PS5 as an HDMI-CEC device. Actual output resolution, HDR, VRR, and refresh rate remain determined by the console and game.

Gigabyte's shared exact-model manual lists PS5 as an HDMI-CEC device. Actual output resolution, HDR, VRR, and refresh rate remain determined by the console and game.

Gigabyte's exact-model manual lists PS5 as an HDMI-CEC device. Actual output resolution, HDR, VRR, and refresh rate remain determined by the console and game.

ASUS' own site advertises "HDMI 2.1 VRR 4K@120Hz: ultra-smooth visuals on PS5 and Xbox Series X" for this exact monitor.

A real customer review on Samsung's own site (Italian) praises the PS5 pairing: "with PS5 it's perfect, nothing more to say, I finally felt the generational leap."

Manufacturer datasheet states: "Optimized for seamless compatibility with gaming consoles like PS5 and Xbox Series X|S. Supported Resolution: 1080p/1440p/2160p at 120Hz. VRR: Supported."

MSI lists PS5 support for VRR on this exact model. Resolution, HDR, VRR, and refresh rate still depend on the console configuration and game.

Acer documents PS5 at UHD or FHD up to 120Hz through one HDMI cable, rather than the panel’s native Dual UHD resolution.

Acer names PlayStation 5 for the X34 V3, but HDMI is limited to 3440 by 1440 at 100Hz on this monitor.

Manufacturer's own compatibility table: "PS5. Refresh Rate: 120Hz." (also lists PS4/PS4 Pro at 60Hz).

Manufacturer's own compatibility table: "PS5. Refresh Rate: 120Hz."

Manufacturer's own table: "PS5 Refresh Rate: 120Hz."

ViewSonic explicitly lists PS5 compatibility; HDMI supports up to 144Hz, and its page links separate 120Hz setup guidance.

ViewSonic lists the exact VX2758A-2K-PRO-4 as PS5 compatible. Actual output resolution, HDR, VRR, and refresh rate depend on console settings and game support.

BenQ's own site table: "PS5: 2K / 1080p 120Hz."

Philips documents a PS5 game mode for this monitor; HDMI is limited to 5120 by 1440 at 60Hz, below the DisplayPort maximum.

Elgato requires disabling HDCP in PS5 settings before 4K X can capture its HDMI signal.

Connect the PS5 to HDMI In and the display to HDMI Out; a DSC display may limit passthrough to 4K120.

AVerMedia’s official platform matrix marks GC551G2 as supported for PlayStation 5 at 4K UHD 120Hz.

Genki instructs PS5 users to disable HDCP before ShadowCast 2 Pro can show the console video feed.

UGREEN lists PS5 as compatible when HDCP is disabled. The card accepts HDMI input up to 4K but captures at 1080p60, so protected streaming apps and Blu-ray cannot be captured.

The manufacturer lists this exact model with PS5 support; protected HDMI content requires the console protection setting to allow capture.

The manufacturer lists this exact model with PS5 support; protected HDMI content requires the console protection setting to allow capture.

Rybozen identifies the V316-Black part number and lists PS5 among supported HDMI sources; its product page describes capture output up to 1080p60 rather than 4K recording.

AVerMedia lists PS5 among the newer consoles supported by the ER330's HDMI and A/V inputs; it passes through 4K gaming while recording gameplay at 1080p.

ClonerAlliance documents 4K60 passthrough for PS5 on the exact CA-989UP, while 4K recordings remain limited to 24 or 30fps.

Disable HDCP on the PS5 before capture, otherwise 4K S shows a black screen instead of the gameplay video.

Community reports of the capture handshake breaking (prolonged black screens, forced hardware resets) specifically when a PS5 Pro switches between a 4K60 menu and a 4K120 VRR game.

The manufacturer lists this exact model with PS5 support; protected HDMI content requires the console protection setting to allow capture.

Manufacturer documentation confirms capture compatibility, though exact resolution/refresh limits depend on the specific setup.

For PS5 capture, disable HDCP in the console HDMI settings; GV-HDREC cannot display or record at 4K resolution.

Elgato documents PS5 use with this exact HD60 S+. For HDR capture, PS5 must use YUV420 and 4K Video Transfer Rate -2; YUV422 results in black capture.

AVerMedia documents PS5 recording and streaming with the GC551, provided HDCP is disabled in the console settings. Protected Blu-ray and DVD content remains unavailable after changing that setting.

Manufacturer's official step-by-step guide covers capturing and streaming PS5 gameplay via the HDMI IN and USB II ports.

Confirmed working on Blackmagic's own forum: "I can confirm that PS4 and PS5 work now after I turned HDCP off." The card enforces HDCP by design and rejects the PS5's default encrypted signal outright (black screen, no error shown) — disabling HDCP in the console's settings is mandatory.

Manufacturer-stated native compatibility with 4K passthrough, including live commentary and party chat voice mixing via the 4-pole 3.5mm jack.

Manufacturer-documented zero-latency 4K60 HDR10 passthrough, capturing true 4K30 SDR or 1080p60 HDR directly from the console.

Flint 4KP supports 3840×2160 at 30 Hz passthrough, so choose it only when that maximum passthrough rate fits the setup.

HD60 S cannot receive HDMI signals protected by HDCP, so disable HDCP on the PS5 before connecting its HDMI output.

Officially supported with PS5, but strictly limited to 1080p30 capture settings.

Connect the PS5 to GC575 HDMI input and use HDMI 2.1 mode for 120 Hz or 144 Hz signals; without a pass-through monitor, preview may fail due to HDMI signal-mode mismatch.

Elgato lists PlayStation 5 as a supported HDMI source. The card is an internal PCIe product and needs a Windows host PC with an available PCIe x4, x8, or x16 slot.

ACASIS explicitly lists PS5 among the supported capture inputs. Install the internal PCIe card in a suitable host computer and disable HDCP on the console before capture when required.

Captures PS5 video, but the initial handshake fails with a flickering pink/green screen unless HDCP is manually disabled in the console's system settings first.

Officially documented by Plugable to capture PlayStation systems, but HDCP must be disabled from the console settings first or there is no video signal at all.

AVerMedia states that the exact GC570D supports LPCM 5.1 audio from PS5. This refers to HDMI game audio; connecting a headset directly to the console controller bypasses that path.

FeelWorld identifies the exact C4K capture device and explicitly lists PS5 as a console source. It does not identify an Xbox generation, so this evidence does not confirm Xbox Series compatibility.

AJA states that Io 4K Plus captures HDR gaming content from PlayStation 5 through HDMI 2.0. This HDR workflow requires AJA Desktop Software and the physical HDMI input connection.